1. Before removing the USB Daughter Board:
3. Gently pry the latches to release the USB board.
4. Lift up the USB board and remove.
- Ensure that the work surface is level and protected to prevent either the surface or the computer from being scratched.
- Make sure the system is powered off by either shutting down the system through the operating system or by manually holding the power button.
- Ensure that all attached devices are powered off.
- Disconnect all external cables from the computer.
- Remove the Battery from the system.
- Remove the Keyboard from the system.
- Remove the Optical Drive from the system.
- Remove the Palm Rest from the system.
- Remove the System Board from the system.
2. Peel the USB board cable from the adhesive affixing it to the chassis.
3. Gently pry the latches to release the USB board.
4. Lift up the USB board and remove.
5.Complete
No comments:
Post a Comment