Dell Inspiron N5040 LVDS Cable/ LCD Cable Removal

1. Before removing the LVDS Cable:

• Ensure that the work surface is level and protected to prevent either the surface or the computer from being scratched.
• Make sure the system is powered off by either shutting down the system through the operating system or by manually holding the power button.
• Ensure that all attached devices are powered off.
• Disconnect all external cables from the computer.
• Remove the Battery  from the system.
• Remove the Keyboard  from the system.
• Remove the Optical Drive  from the system.
• Remove the Hinge Cover  from the system.
• Remove the Palm Rest  from the system.
• Remove the WLAN/Bluetooth  from the system.
• Remove the LCD Assembly  from the system.
• Remove the LCD Bezel  from the system.
• Remove the Camera  from the system.
• Remove the LCD Panel and Hinges  from the system.

 2. Peel the tape covering the LCD cable connection.

3. Carefully disconnect the LCD cable and peel off the LCD cable from the adhesive affixing it to the LCD panel.

4. Complete.